Apraksts
HC-05 Bluetooth raidīšanas-uztveršanas modulis
Seriālais Bluetooth modulis Arduino un citiem mikrokontrolieriem
Darba spriegums: 4V līdz 6V (parasti +5V)
Darba strāvas stiprums: 30mA
Attālums: <100m
Strādā ar Seriālo komunikāciju (USART) un ir TTL savietojams
Seko IEEE 802.15.1 standartizētajam protokolam
Lieto Frequency-Hopping Spread spectrum (FHSS)
Var tikt lietots Master, Slave vai Master/Slave veidā
Var viegli savienot ar portatīvo datoru vai viedtelefonu ar Bluetooth
Atbalstītie “baud rate”: 9600,19200,38400,57600,115200,230400,460800.
! Modulis HC-05 darbojas Master/slave režīmā un var kontaktēt citu Bluetooth ierīci, atšķirībā no HC-06, ko var lietot tikai “slave” režīmā (gaida līdz tiks kontaktēts).
Fabrikas PIN kods: 1234 vai 0000
HC-05 Bluetooth Transceiver Module
Serial Bluetooth module for Arduino and other microcontrollers
Operating Voltage: 4V to 6V (Typically +5V)
Operating Current: 30mA
Range: <100m
Works with Serial communication (USART) and TTL compatible
Follows IEEE 802.15.1 standardized protocol
Uses Frequency-Hopping Spread spectrum (FHSS)
Can operate in Master, Slave or Master/Slave mode
Can be easily interfaced with Laptop or Mobile phones with Bluetooth
Supported baud rate: 9600,19200,38400,57600,115200,230400,460800.
! Module HC-05 works as Master and can connect other Bluetooth device, bur HC-06 only waits to be contacted (slave).
Factory PIN code: 1234 or 0000