Drukāšanas stieple PETG 1.75mm 1kg Gembird 3D printerim (dažādas krāsas)

25.0029.00

Filament for 3D printer PETG 1.75mm Gembird 1kg

Krāsas / Colors:
Melna/Black
Zaļa/Green

Notīrīt
SKU: Nav pieejams Kategorijas:

Apraksts

Gembird drukāšanas stieple PETG/1.75mm/1kg

Ļoti augstas izturības materiāls.
Impact Resistant – PETG is less brittle than acrylic, and is a lower cost alternative to polycarbonate.
Chemical Resistant – offers superior chemical resistance when compared with many other transparent plastics.
Environmental friendly as it is considered 100% recyclable
Very low shrinkage makes printing large flat surfaces a breeze
Easily printed on any acrylic, glass, Kapton and other printing platform

Materiāls: PETG, diametrs 1.75 mm
Neto masa: 1 kg/spole
Blīvums 240°C: 1.27 g/cm3
Kušanas plūsmas indekss g/10min, 200°C/ 5kg: 20
Kušanas punkts: 220 – 260 °C
Heat-Deflection temperatūra pie 0.455 MPa: 60 – 80 °C
Yield stiprums pie 5mm/min: 50 MPa
Impact stiprums: 8.7 KJ/m2
Ensile Break: 120 %
Diametrs: 1.75 ± 0.05 mm
Spoles izmēri: 200 mm diametrs x 67 mm augstums x 53 mm centrālais caurums

Sistēmas prasības: 3D printeris ar 1.75 mm ekstrūderi ar temperatūru ap 240 °C, paredzēts PETG drukāšanas materiālam.

Gembird Filament PETG/1.75mm/1kg
3DP-PETG1.75-01-BK
3DP-PETG1.75-01-G

Very high strength filament
Impact Resistant – PETG is less brittle than acrylic, and is a lower cost alternative to polycarbonate.
Chemical Resistant – offers superior chemical resistance when compared with many other transparent plastics.
Environmental friendly as it is considered 100% recyclable
Very low shrinkage makes printing large flat surfaces a breeze
Easily printed on any acrylic, glass, Kapton and other printing platform

Material: PETG, 1.75 mm diameter
Weight: 1 kg/spool (2.2 lbs)
Density at 240°C: 1.27 g/cm3
Melt Flow Index at g/10min, 200°C/ 5kg: 20
Melt Point: 220 – 260 °C
Heat-Deflection-Temperature at 0.455 MPa: 60 – 80 °C
Yield Strength at 5mm/min: 50 MPa
Impact Strength: 8.7 KJ/m2
Ensile Break: 120 %
Diameter: 1.75 ± 0.05 mm
Spool dimensions: 200 mm diameter x 67 mm height x 53 mm central hole

System requirements: A 3D printer with 1.75 mm extruder of temperature around 240 °C, suitable for PETG filament

Papildu informācija

Krāsa

Melna / Black, Zaļa / Green

Atsauksmes

Pašlaik atsauksmju nav.

Uzraksti atsauksmi pirmais par “Drukāšanas stieple PETG 1.75mm 1kg Gembird 3D printerim (dažādas krāsas)”

Jūsu e-pasta adrese netiks publicēta. Obligātie lauki ir atzīmēti kā *