PETG drukāšanas stieple 3D printerim 1.75mm 1kg (dažādas krāsas)

18.0038.00

Filament for 3D printer PETG 1.75mm 1kg

Krāsas / Colors:
Balta / White – Pelēka / Grey – Melna / Black
Sarkana / Red – Oranža / Orange
Zaļa / Green – Haki / Khaki – Neona zaļa / Neon green
Zila / Blue
Caurspīdīga / Transparent, Crystal
Melna (tumši pelēka) / Prusa Galaxy Black Prusament

SKU: Nav pieejams Kategorijas:

Apraksts

Drukāšanas materiāla stieple PETG 1.75mm 1kg 3D printeriem

Gembird PETG specifikācija
Ļoti augstas izturības materiāls.
Impact Resistant – PETG is less brittle than acrylic, and is a lower cost alternative to polycarbonate.
Chemical Resistant – offers superior chemical resistance when compared with many other transparent plastics.
Environmental friendly as it is considered 100% recyclable
Very low shrinkage makes printing large flat surfaces a breeze
Easily printed on any acrylic, glass, Kapton and other printing platform
Materiāls: PETG, diametrs 1.75 mm
Neto masa: 1 kg/spole
Blīvums 240°C: 1.27 g/cm3
Kušanas plūsmas indekss g/10min, 200°C/ 5kg: 20
Kušanas punkts: 220 – 260 °C
Heat-Deflection temperatūra pie 0.455 MPa: 60 – 80 °C
Yield stiprums pie 5mm/min: 50 MPa
Impact stiprums: 8.7 KJ/m2
Ensile Break: 120 %
Diametrs: 1.75 ± 0.05 mm
Spoles izmēri: 200 mm diametrs x 67 mm augstums x 53 mm centrālais caurums

Spectrum PETG specifikācija
Drukāšanas temperatūra 230-255°C
Drukāšanas galda temperatūra 60-80°C
Drukāšanas ātrums 40-120 mm/s
Blīvums 1.27 g/cm3

 

Filalab PETG specifikācija
Bed temperature: 80°C ± 10°C
Extruder temperature: 240°C ± 10°C
Diameter tolerance: 1.75 mm ± 0.03 mm
Print speed: 60 mm/s
Fan speed: 50 %

Filament PETG 1.75mm 1kg for 3D printers

Gembird PETG specification
Very high strength filament
Impact Resistant – PETG is less brittle than acrylic, and is a lower cost alternative to polycarbonate.
Chemical Resistant – offers superior chemical resistance when compared with many other transparent plastics.
Environmental friendly as it is considered 100% recyclable
Very low shrinkage makes printing large flat surfaces a breeze
Easily printed on any acrylic, glass, Kapton and other printing platform
Material: PETG, 1.75 mm diameter
Weight: 1 kg/spool (2.2 lbs)
Density at 240°C: 1.27 g/cm3
Melt Flow Index at g/10min, 200°C/ 5kg: 20
Melt Point: 220 – 260 °C
Heat-Deflection-Temperature at 0.455 MPa: 60 – 80 °C
Yield Strength at 5mm/min: 50 MPa
Impact Strength: 8.7 KJ/m2
Ensile Break: 120 %
Diameter: 1.75 ± 0.05 mm
Spool dimensions: 200 mm diameter x 67 mm height x 53 mm central hole

Spectrum PETG specification
Nozzle temperature 230-255°C
Bed temperature 60-80°C
Printing speed 40-120 mm/s
Density 1.27 g/cm3
Spectrum PETG full specification

Filalab PETG specification
Bed temperature: 80°C ± 10°C
Extruder temperature: 240°C ± 10°C
Diameter tolerance: 1.75 mm ± 0.03 mm
Print speed: 60 mm/s
Fan speed: 50 %

Papildu informācija

Krāsa / Color

Melna / Black, Filalab, Melna / Black, GST3D, Pelēka / Grey, Filalab, Balta / White, Filalab, Balta / White, GST3D, Balta / White, Gembird, Sarkana / Red, Filalab, Oranža / Orange, Filalab, Oranža / Lion Orange, Spectrum, Dzeltena / Yellow, Gembird, Zaļa / Green, Filalab, Haki / Khaki, Filalab, Neona zaļš / Neon green, Filalab, Zila / Blue, Filalab, Caurspīdīga / Transparent, Filalab, Caurspīdīga / Crystal, GST3D, Prusa Galaxy Black, Prusament, Prusa Orange, Prusament