Soļu motoru kontrolieris A4988


A4988 Stepper Motor Driver / Controller (for CNC Shield V3, CNC Shield V4)

Noliktavā 8 prece/-es


Stepper Motor Driver A4988 (for CNC Shield V3, CNC Shield V4)
To operate bipolar stepper motors in full-, half-, quarter-, eighth-, and sixteenth-step modes, with an output drive capacity of up to 35 V and 2 A.
Simply inputting one pulse on the STEP input drives the motor one microstep.
There are no phase sequence tables, high frequency control lines, or complex interfaces to program.
The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened.
Simple step and direction control interface.
Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
Adjustable current control lets you set the maximum current output with a potentiometer,
which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
Intelligent chopping control that automatically selects the correct current decay mode
(fast decay or slow decay)
Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
Short-to-ground and shorted-load protection

Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver.