Apraksts
Bambu šķidrā līme
3D printeru drukāšanas virsmai
80g/60ml
—
Bambu Liquid Glue for Build Plate
80g/60ml
The Bambu Lab Liquid Glue is an adhesive specially developed for 3D printing, suitable for printing materials such as PLA, ABS, and PETG on appropriate surfaces including the Cool Plate, High-Temperature Plate, Textured PEI Plate and Textured PEI Plate. When using Bambu Lab Liquid Glue, constant adhesion is maintained without worrying about models falling off or warping.
Excellent adhesion: avoid printing failures by ensuring that the models adhere perfectly to the print surface. Bambu Lab Liquid Glue also makes it easier to remove prints from the plate when finished.
The Bambu Lab Liquid Glue can be cleaned easily from the print surface and from models. Compared with glue stick, liquid glue for build plate will leave less residue on the printed model and is easier to clean up.
Compared with glue stick, Bambu Lab Liquid Glue is easier to apply uniformly over the build surface
The ingredients are environmentally friendly and harmless to the human body, with lower odor compared to other glues
Instructions
Apply pressure to the applicator head to open the internal valve; then, spread glue evenly over the print area. After printing, simply clean the build plate and the bottom of the model with water.
Caution
Suitable for filaments such as PLA, PETG, PET, ABS, ASA, TPU.
To ensure maximum effect, multiple glue applications are not recommended.
Do not squeeze the bottle too hard.
If the adhesion to some filament is not enough, please increase the temperature of the hotbed appropriately.